[version]
signature=$chicago$

[setup]
display=0
express=1
optionalcomponents=1
system=0
timezone="gmt"
installtype=3
installdir=c:\windows
ebd=0

[System]
DisplChar=16,800,600

[printers]

[imprimantes]

[nameandorg]
name=GENERIQUE
org=PERIMETRE

[OptionalComponents]
"Accessoires"=1
"Communications"=0
"Utilitaires disque"=1
"Multimédia"=1
"Ecrans de veille"=1
"Outils de compression de disque"=0
"Paint"=1
"HyperTerminal"=1
"Defrag"=1
"Calculatrice"=1
"Backup"=1
"Numéroteur téléphonique"=1
"Fenêtres volantes"=1
"Papiers peint du bureau"=1
"Ecrans de veille OpenGL"=1
"Ecrans de veille supplémentaires"=1
"Jeux"=1
"Vue-mètre ressources système"=1
"Microsoft Fax"=0
"Gestion de bureau"=1
"Options d'Accessibilité"=1
"Imaging"=1
"The Microsoft Network"=0
"Compression audio"=1
"Compression vidéo"=1
"Magnétophone"=1
"Contrôle du volume"=1
"Lecteur multimédia"=1
"Microsoft NetMeeting"=0
"Microsoft Exchange"=0
"Services de Microsoft Mail"=0
"Porte-documents"=1
"Modèles de document"=1
"WordPad"=1
"Accès réseau à distance "=0
"Connexion directe par câble"=0
"Pointeurs de souris"=1
"Présentation de Windows 95"=1
"Guide de l'utilisateur en ligne"=0
"Moniteur système"=1
"Observateur réseau"=1
"Table de caractères"=1
"Aperçu rapide"=1
"Modèles de sons multimédia"=1
"Exemples de sons"=1
"Lecteur CD"=1

[DestinationDirs]
RM.driver.dest.copy                  = 30    ; root directory

[install]
copyfiles=RM.driver.dest.copy
updatecfgsys=RM.Sys.upd
updateautobat=RM.Auto.upd

[RM.driver.dest.copy]
cddrv.sys
mouse.com

[RM.Sys.upd]
DevAddDev=cddrv.sys,device,,"/D:OEMCD001"

[RM.Auto.upd]
CmdAdd=MSCDEX.EXE,"/D:OEMCD001 /L:D"
CmdAdd=mouse.com,"/r1"
CmdAdd=set,"blaster=a220 i5 d1"

[OEMInfo.copy]
OEMINFO.INI

[SourceDisksNames]
100="%oem.boot.desc%",,5,A:\

[SourceDisksFiles]
cddrv.sys=100,,2000
mouse.com

[Strings]
oem.boot.desc="Disque d'amorçage d'installation Perimetre"

; DRVCOPY.INF
;
; This is the Driver Copy information file for
; real-mode CD-ROM drivers.
;
; These driver(s) are copied to the root of the hard disk
; during setup, and are installed in config.sys and autoexec.bat
;
; This file MUST be modified by the OEM prior to shipping
; to end users.
;
; OEMs will need to modify this to add the proper name(s)
; for their real-mode CD ROM drivers.
; Lines that must be modified are marked OEM_Modify
; You can also copy additional drivers and add lines to autoexec.bat
; and config.sys using this file.


[version]
; Do not change this section
signature=$chicago$

[DestinationDirs]
; Do not change this section
RM.driver.dest.copy                  = 30    ; root directory

[install]
; Do not change this section
copyfiles=RM.driver.dest.copy
updatecfgsys=RM.Sys.upd
updateautobat=RM.Auto.upd

[RM.driver.dest.copy]
; OEM_Modify - Change the name from SAMPLE.SYS to your CD ROM drivers.
;            - You can insert additional filenames for your real
;              mode driver(s).
; This file name will be copied to the hard disk.
SAMPLE.SYS

[RM.Sys.upd]
; OEM_Modify - Change the name from SAMPLE.SYS to your CD ROM drivers.
:            - You can also change the driver name here and below.
; This line will be added to the user's CONFIG.SYS.
DevAddDev=SAMPLE.SYS,device,,"/D:OEMCD001 /I:15"

[RM.Auto.upd]
; OEM_Modify - Change the "D" in L:D to represent the default drive
;              letter for your CD ROM.
;            - The OEMCD001 parameter should agree with the
;              config.sys parameter above.
; This line will be added to the user's AUTOEXEC.BAT
CmdAdd=MSCDEX.EXE,"/D:OEMCD001 /L:D"

[OEMInfo.copy]
OEMINFO.INI

[SourceDisksNames]
; Do not change this section
100="%oem.boot.desc%",,5,A:\

[SourceDisksFiles]
; OEM_Modify - Change the name from SAMPLE.SYS to your CD ROM drivers.
; Do not change the 100,,2000
; This file will be copied to the hard disk root directory.
SAMPLE.SYS=100,,2000

[Strings]
; This string is displayed to the user.  It can be localized as
; necessary.
oem.boot.desc="Disque d'amorçage d'installation"