Win3x.Org

I guess this is a mother board update-- http://www.win3x.org/uh19/motherboard/show/4439
=================================

Manufacturer name: Shuttle
[required!] Motherboard name: Shuttle HOT 419
Motherboard schema: Baby AT; OPTi895 Chipset
Supported memory: 4x72 Pin FPM, 32MB each, up to 128 MB total
Supported CPUs: Socket 3; 5v Only ( Has pads for 3.3v regulators, but components are not on this version of the board)
[required!] Photo(s) of the motherboard: (must be over 800x600 res and not blurry; either you must be the owner of the photos or these ones have to be free)

Manual(s): http://www.win3x.org/uh19/motherboard/show/4439
Motherboard BIOS(es): http://vogonsdrivers.com/getfile.php?fi ... enustate=0
40-P3J4-DK1343-00101111-121593-OPTi895-H
Notes: (if you have any useful piece of trivia about the motherboard like fake cache, bad caps, etc)
MR Bios available for this board
Supports L2 Cache up to 512Kb

It's added as far as I can see.

I posted in the wrong forum. It should have been a motherboard update.

Can you please move my post?

Yes, of course ^^

The thread is now in the right forum :)

My motherboard did not work with the MrBios Opti895 bios but this was a good runner up---

http://vogonsdrivers.com/getfile.php?fi ... enustate=0

The link has a manual that more closely matches my revision of the board and a bios dated 10/10/1994 that

• correctly identifies an AMD 5x86 processor
• is stable when working with P24D style processors in WB mode
• support for larger hard drives & 32 bit transfers & PIO Mode 4
• lots of cache tweaks

Can you please post the ID string from the 10/10/94 core bios? I can't extract it with normal tooling and it does not want to run in PCem.

The rest is added.