I. Install DOS
Obviously, don't forget to install DOS prior Windows 1.x, 2.x or even 3.x (except the NT branch).
|MS-DOS 6.22 (4.3 Mo) Clics : 5279|
II. Install Windows
Download the Windows version you want: viewforum.php?f=34
Extract the archives with 7-Zip, which is probably the best choice (freeware).
Insert the floppy disk n°1 and type on the command prompt:
To install Windows for Workgroups 3.11 with the Internet support, see another tutorial.
III. Start Windows
When the installation is complete, type:
cd windows win
Your config.sys file must contain that line: DEVICE=C:\DOS\SETVER.EXE
To run Windows 1.x on MS-DOS 6.xx, you have to type this on the commands prompt:
SETVER WIN100.BIN 3.30